home *** CD-ROM | disk | FTP | other *** search
- <<< PFile Printer ID file >>>
-
- Command identifiers must be entered exactly as they are in the
- manual. They must begin with a period in the first column and end
- with a colon. All non printable characters must be entered in the
- format "\DDD" where DDD is the decimal ASCII code of the character.
- Three digits must be used. Comments can be interspersed throughout
- this file, however, nothing but the printer codes can be on the
- command lines. The commands can be in any order.
-
- .TMARGIN: 0
- .BMARGIN: 6
- .BORDER: ═
-
- The codes in this file are the same as the defaults in the program.
-
- The printer command is for cosmetic purposes only. It is there
- to describe what printer these codes are for. The three column
- commands are to enable your printer to print correctly if your
- compressed mode is not exactly 17 characters per inch(cpi). To
- arrive at the appropriate number, multiply the exact cpi by 8 (the
- width of the paper). For example, on the HP LaserJet II the
- compressed print setting is 16.66 cpi. The COMP_COL command would
- be 133 (16.66 * 8). However, in the compressed mode there is a 9
- space margin so the actual number of printed columns would be 124 if
- there were no line numbers being printed.
-
- The PRINTER parameter can not be more than 15 characters long.
-
- .PRINTER: NX2400 Draft
-
- The next 7 commands each have a maximum length of 45.
-
- .INITIALIZE: \027x0
- .6LPI: \0272
- .8LPI: \0270
- .66LPI: \0283\055
- .17CPI: \027P\015
- .12CPI: \018\027M
- .10CPI: \018\027P
-
- .PICA_COL: 80
- .ELITE_COL: 96
- .COMP_COL: 136
-
- .TAB: 4
- .PAGESIZE: 11
-